Mechanical Instructions
4.
Figure 4-3 Cable dressing (42")
4.2
Service Positions
For easy servicing of a TV set, the set should be put face down
on a soft flat surface, foam buffers or other specific workshop
tools. Ensure that a stable situation is created to perform
measurements and alignments. When using foam bars take
care that these always support the cabinet and
never
only the
display.
Caution:
Failure to follow these guidelines can
seriously damage the display!
Ensure that ESD safe measures are taken.
4.3
Assembly/Panel Removal
Instructions below apply to the 32HFL5332/xx, but will be
similar for other models.
4.3.1
Rear Cover
Warning:
Disconnect the mains power cord before removing
1.
Remove fixation screws that secure the rear cover.
2.
Lift the rear cover from the TV. Make sure that wires and
flat foils are not damaged while lifting the rear cover from
the set.
19020_102_100727.ep
s
100727
