Mechanical Instructions
4.
4.3.8
LCD Panel
Refer to figure “LCD Panel” for details.
1.
Unplug the LVDS connector [1].
Caution:
be careful, as this is a very fragile connector!
2.
Unplug the connectors [2].
3.
Remove the fixation screws [3] and [4].
4.
Lift the subframe from the set.
5.
The LCD panel can now be lifted from the front cabinet.
Figure 4-13 LCD Panel
4.4
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position. See see figure 4-2
Cable dressing 32”.
•
Pay special attention not to damage the EMC foams on the
SSB shields. Ensure that EMC foams are mounted
correctly.
I_17500_064.ep
s
1
8
040
8
1
2
2
4
4
4
4
3
3
3
3
3
3
3
3
3
