18
EN
Note
•
If the USB device does not have enough memory to
store the audio files, a message about a full memory is
displayed.
•
With MP3-CD playback, you can only record all tracks
in the current folder.
Set the timer
If a timer is set, the product will be turned on
automatically after a preset time.
Note
•
Make sure that clock is set correctly.
1
In standby mode, press and hold
TIMER
for two seconds.
»
[TIMER SET]
is displayed, then a
prompt to select the sound source is
displayed.
2
Press / repeatedly to select a sound
source: DISC, USB, FM, or AM.
3
Press
TIMER
to confirm.
»
[12H]
or
[24H]
is displayed.
4
Press / to select 12 hour or 24 hour
format.
5
Press
TIMER
to confirm.
»
In 12 hour format,
[AM]
or
[PM]
is
displayed. Repeat steps 4 to 5 to select
AM or PM. Then the hour digits begin
to flash.
»
In 24 hour format, the hour digits begin
to flash.
6
Repeat steps 4 to 5 to set the hour,
minute, and the volume of the sound
source.
»
If the product is in standby or Eco
power standby mode, the selected
sound source will be activated when
the preset time comes.
Note
•
To cancel timer setting, press .
•
During timer setting, if no action is taken within
90 seconds, the product exits timer setting mode
automatically.
Activate or deactivate the timer
• In standby mode, press
TIMER
repeatedly
to activate or deactivate the timer.
»
If the alarm timer is activated,
[TIMER
ON]
is displayed.
»
If the alarm timer is deactivated,
[TIMER OFF]
is displayed.
Set sleep timer
When the product is turned on, press
SLEEP
repeatedly to select a period of time (in
minutes).
»
The product switches to standby
mode automatically after the preset
time period.
»
When
[SLEEP OFF]
(sleep off)
is displayed, the sleep timer is
deactivated.
Summary of Contents for NTX401
Page 2: ......
