Eyebrow guard
Use the full-size hair trimmer with
the
eyebrow guard attached for tidying up
eyebrows or trimming sideburns to a length
of 1/4in./6mm.
1 Slowly move the trimmer against the hair
growth direction. Press lightly and make
sure that the surface of the comb always
stays in contact with the skin (Fig. 13).
Nose trimmer
Use the nose trimmer to trim your nose hair
and ear hair.
- Make sure nasal passages are clean.
Make sure outer ear channels are clean
and free from wax.
- Do not insert the tip more than
3/16in./5mm.
- Always clean the attachment after each
use.
Trimming nose hair
1 Gently move the tip in and out of nose
while turning it around to remove
unwanted hairs (Fig. 14).
Trimming ear hair
1 Slowly move the tip round the ear to
remove hairs that stick out beyond the
rim of the ear.
2 Gently move the tip in and out of the
outer ear channel to remove unwanted
hairs (Fig. 14).
Precision shaver
Use the precision shaver after trimming, to
shave unwanted hairs on cheeks, chin and
along the beard with precision. Make sure
to pre-trim your beard first, with the full-
size hair trimmer without guard, to obtain
the best result.
Note: Use the precision shaver to remove
remaining hairs and detailing your beard
style. It is not suitable for a full face shave.
1 Gently press the precision shaver onto
the skin and shave along contoured
edges to remove any unwanted hairs
(Fig. 15).
Cleaning
Never use scouring pads, abrasive cleaning
agents or aggressive liquids such as
gasoline or acetone to clean the product.
Never dry the trimmer teeth with a towel
or tissue, as this may damage the trimmer
teeth.
After every use: cleaning under the tap
1 Turn off the product and disconnect from
the power outlet.
2 Remove any comb or cutting element
(see 'Detaching and attaching cutting
elements') from the product.
3 Rinse the hair chamber under a warm
tap.
4 Clean the cutting element and comb
under a warm tap (Fig. 16).
5 Carefully shake off excess water and let
all parts air dry completely.
Thorough cleaning
1 Turn off the product and disconnect from
the wall outlet.
2 Wipe the handle of the product with a
dry cloth.
3 Remove any guard or cutting element
(see 'Detaching and attaching cutting
elements') from the product.
4 Remove any hairs that have accumulated
in the hair chamber with the cleaning
brush supplied.
5 Remove any hairs that have accumulated
in the cutting elements and/or guards
with the cleaning brush supplied.
6 Clean the cutting elements under a warm
tap (Fig. 16Fig. 17).
7 Clean the guards under a warm tap (Fig.
18).
8 Carefully shake off excess water and let
all parts air dry completely.
Cleaning the nose trimmer
Clean the nose trimmer immediately after
use and when a lot of hair or dirt has
accumulated on the nose trimmer head.
1 Rinse the nose trimmer head with hot
water (Fig. 19).
2 Turn on the product and rinse the nose
trimmer head once more to remove any
remaining hairs. Then turn off the
product again.
