Connectivity
Air Matters
NanoCloud technology evenly distributes invisible water vapour into your room.
In dry conditions moisture from the humidifier will be absorbed by walls,
furniture, and other items in your room. Ventilation of dry outside air will also
increase the time it takes to reach the target humidity.
To optimize humidification and purification performance, it's recommended to
close doors and windows during use.
Allergen
mode
2-in-1
mode
Auto
mode
Purification
ONLY mode
Sleep
mode
Replace
filter alert
Water
refill alert
Pre-filter
cleaning
alert
3-digit display PM2.5 /
IAI / Humidity level
PM2.5
indicator
WiFi
indicator
Air quality
ring
Good
Poor Very poor
Fair
Child
lock
Auto
Mode
Fan
speed
Power
Hold for 3 seconds
Humidity
setting
Light
dim
Timer/
reset
2-in-1
mode
on/off
Indoor Allergen
Index
Open the app and click ‘+’ on, to connect your device.
Please follow the steps in the app.
We partner with Air Matters, one of the leading air quality apps.
Download and install the apps
Control
Display
Allergen index from 1 to 12
where 1 indicates best air quality
Hold for 3 seconds: Display switch between
PM2.5 / IAI / Current humidity level
Micromario DI MET_EN
90x127mm
When display shows F0
When display shows A3 / C7 / F1
The filter may produce smell after being used
for a while because of the absorption of indoor
air. Remove the filter and place it where it has
direct sunlight and ventilation for several hours.
Re-install and try using it again. If the odor
remains, please replace the filter.
Maintenance
Clean the pre-filter and wick
Time to replace NanoProtect filter
Time to replace wick
Descale the wick with the water and white
vinegar or citric acid, rinse with water and air dry.
EVERY
WEEK
Time to replace Active Carbon filter
!
Press for 3 seconds to reset after
cleaning or replacing accessory
Rinse the water tank, the water tray and the
NanoCloud rotray humidification wick.
2 hours
NanoProtect filter Series 3
NanoProtect filter
Active Carbon
Pre-filter
Wick
4241 211 03511-1
