31
EN
2
Press and hold
on the base station for
10 seconds.
3
Enter the system PIN. Press
REDIAL/C
to make corrections. Then press
MENU/
OK
to confirm the PIN.
»
Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
•
If the PIN is incorrect or no base is found within a
certain period, a notification message will be displayed
on your handset.
•
If registration fails, unplug the power adapter from the
base station and plug it back. Wait for 15 seconds, and
then repeat the registration procedure.
•
The preset PIN is 0000. No change can be made on it.
Unregister the handsets
1
Press
MENU/OK
.
2
Select
[Services]
>
[Unregister]
, then
press
MENU/OK
to confirm.
3
Enter the system PIN. (The preset PIN is
0000). Press
REDIAL/C
to remove the
number.
4
Select the handset number to be
unregistered.
5
Press
MENU/OK
to confirm.
»
The handset is unregistered.
Tip
•
The handset name is displayed beside the handset
number in standby mode.
Restore default settings
You can reset your phone settings to the
original factory settings.
1
Press
MENU/OK
.
2
Select
[Services]
>
[Reset]
, then press
MENU/OK
to confirm.
»
A confirmation request is displayed on
the handset.
3
Press
MENU/OK
to confirm.
»
All settings (except the phonebook
and direct access keys information) are
reset.
