Philips M1772A, Instructions For Use Manual

Page: 15 / 82

The Keyboard and Front Panel
PageWriter 100 M1772A Cardiograph 1-5
1
1
C Low Battery This light indicates that the cardiograph must be plugged
in to recharge the battery.
D Switches the cardiograph between On and Standby.
Standby means the cardiograph is off but it is still keeping
the battery charged as long as the cardiograph is plugged
into AC power.
Sequentially changes the chart speed from 5, => 10, =>
25, => 50, => 5 mm/second.
Sequentially changes the limb and chest lead sensitivity
from 5, => 10, => 20, => 5 mm/mV.
Reduces the chest lead sensitivity to 50% of the value set
by .
Turns the Baseline Wander and Noise filters on or off. See
“Auto Report Filters” , and “Manual Report Filters”
for more information.
Advances the paper to the beginning of the next page.
Starts an Auto ECG recording.
Starts a Manual ECG recording.
Sequentially changes the lead group used to generate a
Manual ECG from I II III, => aVR aVL aVF, => II aVF
V2, => V1-V6, => I II III.
Halts any cardiograph function.
Prints a copy of the last Auto ECG. If you want additional
copies of an Auto ECG, you must print them before
recording another Auto or Manual ECG.See “Making
Copies of Auto ECGs” , Recording an ECG for more
information.
2Q6WDQGE\
&KDUW6SHHG
(&*6L]H
9/HDGV
(&*6L]H
)LOWHU
3DJH$GYDQFH
$XWR
0DQXDO
6WRS
&RS\