6
User manual
2.2 Insert and eject the memory card
The Digital Pocket Memo operates with an SD
(Secure Digital) memory card and supports SD
cards with storage capacities of up to 2 GB.
Your Digital Pocket Memo is packaged with a
memory card already inserted and formatted.
To eject the memory card:
Locate the memory card slot on the top
1
back side of the Digital Pocket Memo.
Press the memory card in the Digital Pocket
2
Memo until it clicks.
3
Release the memory card. It will slightly
3
emerge from the memory card slot. Simply
slide it out.
To insert a memory card:
Locate the memory card slot on the top
1
back side of the Digital Pocket Memo.
Slide the memory card into the slot. A small
2
illustration under the memory card slot
indicates the correct orientation.
4
Push the memory card in until you hear a
3
click.
Get started
2
Install the batteries
2.1
The Digital Pocket Memo can be operated
with the two AAA batteries delivered with the
product. Philips rechargeable batteries may also
be used. See
19 for more information.
The on/off switch of the Digital Pocket
1
Memo must be in the
OFF
position.
Open the battery compartment on the back
2
side of the Digital Pocket Memo by sliding it
outwards then folding it up.
Insert the two AAA batteries. The correct
3
polarity is indicated on the inside of the
battery compartment cover.
1
2
Close the battery compartment by folding
4
it back and sliding the battery compartment
cover inside until it clicks.
D
Note
Do not mix battery types! Use two rechargeable
batteries or two non-rechargeable alkaline
batteries.
2
1
3
philips
Unlock
4
