User manual
E
N
G
L
IS
H
E
Tip:
It is good practice to make a note of the location and network socket number of each
LAN Docking Station before they are deployed. You can enter this information into the
comment field of the LAN Docking Station configuration interface, which will make it easier to
troubleshoot and maintain LAN Docking Stations in your network. See
Assigning a comment to
the LAN Docking Station
on page 16 for more information about assigning comments.
2.2 Installation using the factory default IP address
If your network does not have a DHCP server, follow these steps to install a new LAN Docking
Station:
Connect the LAN Docking Station to the main power supply with the included Philips power
supply.
Connect the LAN Docking Station to a free network socket using the RJ45 network cable.
Slide a Digital pocket Memo 9600 or 9620 into the docking slot of the LAN Docking Station.
Press and hold the
FUNCTION
and the
MENU
button on the Digital Pocket Memo
simultaneously for 3 seconds. The LAN Docking Station will be configured to use the static IP
address 192.168.109.1 (subnet mask 255.255.255.0).
Configure the network connetion settings of your PC to use a static IP address like
192.168.109.xxx and subnet mask 255.255.255.0 for the network socket that is used to
connect the LAN Docking Station.
Open a Web browser on your PC and enter
http://192.168.109.1
in the address field
Your user name and password is required. Leave the
USER NAME
field empty and enter
‚administrator‘ in the
PASSWORD
field.
Change the IP address of the LAN Docking Station according to your network policy. See
Assigning a static IP address
on page 14 for more information.
Make any additional configuration changes as you see fit. See
Configuration
on page 8 for more
information.
D
Note:
This procedure resets all configuration settings of the LAN Docking Station to their
factory defaults.
C
Important:
If installing several LAN Docking Stations, be sure to change the IP address of
the LAN Docking Station before connecting the next one to the network. Failure to do so
will result in IP address conflicts, making the configuration interface of the LAN Docking
Station inaccessible.
1�
2�
3�
4�
5�
6�
7�
8�
9�
Summary of Contents for LFH 9160
Page 142: ...142 Gebruikershandleiding ...
