Philips IntelliVue Series, Installation And Service Manual

Page: 494 / 522

Dial Out Procedure
D-2
Dial-In Procedure for Remote Access to Information Center Systems
Dial Out Procedure
Making the
Remote Access
Connection
The following procedure makes the remote access connection to a Database Server
with RAS enabled and connected to an inward dial telephone line.
Step 1. Enter the Service Password
Step 2. Call the person whose remote Database Server is being dialed into and ask
them to enable their RAS application.
Enabling RAS on a Philips DBS is accomplished by the following:
Select Other Services and Remote Access Admin of the Service
application shell. or go to the Control Panel -> Administrative
Tools -> Routing and Remote Access
Click to select the Server Name in the left frame of the Routing and
Remote Access window
Right click and select All Tasks -> Start or Restart to start the
service .
Notes The DBS IP Address is required to make the remote connection. In addition, other
Philips devices may require remote Remote Access and these IP Addresses will also
be required. These IP Addresses can be found by going to one of the Information
Center or Client devices and:
– click on All Controls
– click on Status Log
– click OK for English
– record IP Address for DBS, Information Center, and Clients you may be
connected to
Request and record the dial-in Phone Number for the remote DBS.
Entering Name and
Phone # on the
Accessing PC
Windows 2000 PCs
Step 1. Open Control Panel -> Network and Dial-up Connections .
Step 2. Double click on Make New Connection .
Step 3. At the Welcome window, click Next to begin.
Step 4. In the Network Connection Type window, select Dial-up to private
network .
Step 5. In the Phone Number to Dial window:
• enable Use dialing rules