4
The battery indication flashes white until your toothbrush is fully
charged.
Important: The wall adapter must be a safe extra low voltage
source, compatible with the electrical ratings marked on the device.
Important: Only toothbrush models HX993W, HX993B, HX993P,
HX993S, HX993L can be charged in the travel case. Other products
and batteries are not compatible with the travel case.
Note: It takes at least 24 hours to fully charge your Philips Sonicare.
You do not have to fully charge your handle before first use, as the
handle is pre-charged for first use. However, it is recommended to
fully charge it after first use.
Note: This charger is designed to properly charge only one handle
at a time. This charger is not compatible with other models of
Philips Sonicare.
Note: Do not place metallic objects in the travel case, as handle
charging may be affected and may cause the charger to overheat.
Cleaning
Note: Do not clean the brush head, handle or travel case in the
dishwasher.
Toothbrush handle
1
Remove the brush head and rinse the metal shaft area with
warm water. Make sure you remove any residual toothpaste.
Caution: Do not push on the rubber seal on the metal shaft with
sharp objects, as this may cause damage.
2
Wipe the entire surface of the handle with a damp cloth.
Note: Do not use isopropyl rubbing alcohol, vinegar or bleach to
clean handle as this may cause discoloration.
14
English
