3
Easy start is disabled by holding the mode/intensity button and
by pressing the power button once while on the charger. The
handle will beep once to confirm it is disabled.
Note: Using the Easy-start feature beyond the initial ramp-
up period is not recommended and reduces Philips Sonicare
effectiveness in removing plaque.
Note: Each of the first 14 brushings must be at least 1 minute in
length to properly move through the Easy-start ramp-up cycle.
Note: To achieve clinical efficacy, Easy-start needs to be
deactivated.
f. Travel case (specific types only)
Your Philips Sonicare comes with a travel case to make traveling
with your power toothbrush more convenient. It is designed
to accommodate the power toothbrush handle and two brush
heads. Some models come with a USB charging travel case which
connects to your laptop via USB -this allows you to charge your
Philips Sonicare when traveling. For information about charging
your Philips Sonicare with the travel case, see
‘Battery status and
charging’
.
Battery status and charging
Charging with glass (specific types only)
1
Plug the charging base into a wall socket.
2
Place the charging glass on top of the charging base and
place the handle in the glass.
The charging indicator flashes white until your toothbrush is
fully charged.
Charging with travel case (specific types only)
1
Place the handle in the charging travel case.
2
Connect the charging travel case to a UL 60950-1 and IEC
60950-1 Listed computer, laptop, USB hub, USB receptacle,
or wall adapter. The USB cord is attached to the travel case
and stored in the cord storage compartment.
3
The wall adapter shall have an output marked Class 2 or the
limited power source (LPS) requirements and compatible with
the electrical ratings marked on the travel case.
13
English
