3 - 2
3 - 2
Dismantling of the DVD Module
1) Loosen 4 screws “E” to remove the DVD Module as shown in
Dismantling of the Power Board
1) Loosen 4 screws “D” at the top of the Power Board as shown in
2) Using a noise plier to press the rubber space tightly,then,you can
Dismantling of the Control Board
Note:In some service positions the components or copper patterns of one board may risk touching its neighbouring pc boards or
metallic parts. To prevent such short-circuit use a piece of hard paper or other insulating material between them.
D
Figure 7
Figure 6
Figure 8
E
Figure 9
Service Position
C
top of Control Board
