6
EN
Wireless subwoofer
The SoundBar comes with a wireless subwoofer.
a
CONNECT (connect)
Press to to enter the pairing mode for the
subwoofer.
b
Subwoofer indicator
• When the power is turned on, the
indicator lights up.
• During wireless pairing between the
subwoofer and the main unit, the
indicator blinks white quickly.
• When the pairing succeeds, the
indicator lights up white.
• When the pairing fails, the indicator
blinks white slowly.
c
AC MAINS~
Connect to the power supply.
3 Connect and set
up
This section helps you connect your SoundBar
to a TV and other devices, and then set it up.
For information about the basic connections of
your SoundBar and accessories, see the quick
start guide.
Note
•
For identification and supply ratings, see the type plate
at the back or bottom of the product.
•
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Pair up with the subwoofer
The wireless subwoofer automatically pairs
up with the SoundBar for wireless connection
when you turn on the SoundBar and the
subwoofer.
If no audio from the wireless subwoofer can be
heard, manually pair up the subwoofer.
1
Turn on the SoundBar and the subwoofer.
»
If the connection to the SoundBar is
lost, the indicator on the subwoofer
blinks white slowly.
2
Press the
CONNECT
(connect) button on
the subwoofer to enter the pairing mode.
»
The indicator on the subwoofer blinks
white quickly.
3
On the remote control, within six seconds
press twice then
BASS +
once, and then
hold down
SURROUND ON
.
»
If the pairing succeeds, the indicator on
the subwoofer lights up white.
»
If the pairing fails, the indicator on the
subwoofer blinks white slowly.
4
If the pairing fails, repeat the steps above.
HTL3142S_12_UM_V3.0.indb 6
4/23/2015 4:52:53 PM
Summary of Contents for HTL3142S
Page 2: ......
