Philips HTB7530D/12, User Manual

Page: 17 / 50

15
EN
Caution
•
Familiarize yourself with the network router, media
server software and networking principles. If necessary,
read documentation that accompanies the network
components. Philips is not responsible for lost, damaged,
or corrupt data.
Before you start
• Make the necessary connections described
in the quick start guide, and then switch
the TV to the correct source for your
home theater.
Set up the wired network
What you need
• A network cable (RJ45 straight cable).
• A network router (with DHCP enabled).
1
Using a network cable, connect the LAN
connector on your home theater to the
network router.
2
Press (
Home
).
3
Select
[Setup]
, and then press
OK
.
4
Select [Network] > [Network
installation]
>
[Wired (Ethernet)]
.
5
Follow the onscreen instructions to
complete the setup.
• If connection fails, select
[Retry]
, and
then press OK .
LAN
www
6
Select [Finish] , and then press OK to exit.
• To view the network settings, select
[Setup] > [Network] > [View
network settings]
.
Set up the wireless network
Your home theater has a built-in Wi-Fi for easy
access to a wireless network.
What you need
• A network router (with DHCP enabled).
For best wireless performance, coverage,
and compatibility, use 802.11n router.
1
Press ( Home ).
2
Select [Setup] , and then press OK .
3
Select
[Network]
>
[Network
installation] > [Wireless (Wi-Fi)] , and
then press
OK
.
4
Follow the onscreen instructions to select
and set up the wireless network.
• If connection fails, select
[Retry]
, and
then press OK .
5
Select
[Finish]
, and then press
OK
to exit.
• To view the network settings, select
[Setup]
>
[Network]
>
[View
wireless settings] .
www