11
EN
•
[One Touch Play]
(One-touch play): When
a video disc is in the disc compartment,
press to wake up the TV from standby,
and then play a disc.
•
[One Touch Standby]
(One-touch
standby): If one-touch standby is enabled,
your SoundStage can switch to standby
with the remote control of the TV or other
HDMI-CEC devices.
•
[System Audio Control]
(System
audio control): If system audio control
is enabled, the audio of the connected
device is output through your SoundStage
automatically when you play the device.
•
[Audio Input Mapping]
(Audio input
mapping): If system audio control does not
work, map the connected device to the
correct audio input connector on your
SoundStage (see 'Set up the audio' on
page 11).
Note
•
To change the EasyLink control settings, press , select
[Setup]
>
[EasyLink]
.
Set up the audio
If you cannot hear the audio output of a
connected device through your SoundStage, do
the following:
•
Check that you have enabled EasyLink on
all the devices (see 'Enable EasyLink' on
page 10), and
•
on your TV, set the audio output to
"Amplifier" (instead of TV speakers). For
details, see the TV user manual, and
•
setup the EasyLink audio control.
1
Press .
2
Select
[Setup]
, and then press
OK
.
3
Select
[EasyLink]
>
[System Audio
Control]
>
[On]
.
•
To play the audio from the TV
speakers, select
[Off]
, and skip the
following steps.
4
Select
[EasyLink]
>
[Audio Input
Mapping]
.
5
Follow the onscreen instructions to map
the connected device to the audio inputs
on your SoundStage.
•
If you connect your SoundStage to the
TV through an
HDMI ARC
connection,
make sure that the TV audio is mapped
to the ARC input on your SoundStage.
Connect and set up a home
network
Connect your SoundStage to a network router
for a network setup, and enjoy:
•
Streamed multimedia content (see 'Browse
•
Smart TV (see 'Browse Smart TV' on page
•
BD Live applications (see 'BD-Live on Blu-
•
Software update (see 'Update software
through the Internet' on page 27)
Caution
•
Familiarize yourself with the network router, media
server software and networking principles. If necessary,
read documentation that accompanies the network
components. Philips is not responsible for lost, damaged,
or corrupt data.
Before you start
•
For Smart TV and software updates, make
sure that the network router has access to
the Internet with high-speed connection
and is not restricted by firewalls or other
security systems.
•
Make the necessary connections described
in quick start guide, and then switch the TV
to the correct source for your SoundStage.