29
EN
Step 2: Update the software
Caution
•
Do not switch off the home theater or
remove the USB flash drive during the
update.
1
Connect the USB flash drive
containing the downloaded file to your
home theater.
•
Make sure that the disc
compartment is closed and no disc
inside.
2
Press (
Home
).
3
Select
[Setup]
, and then press
OK
.
4
Select
[Advanced]
>
[Software
update]
>
[USB]
.
5
Follow the onscreen instructions to
confirm the update.
»
Update process takes about
5 minutes to complete.
Update software through the
Internet
1
Connect your home theater to a
home network with a high-speed
Internet access (see 'Connect and set
up a home network' on page 12).
2
Press (
Home
).
3
Select
[Setup]
, and then press
OK
.
4
Select
[Advanced]
>
[Software
update]
>
[Network]
.
»
If an upgrade media is detected,
you are prompted to start or
cancel the update.
»
Downloading of the upgrading file
may take long, depending on your
home network condition.
5
Follow the onscreen instructions to
confirm the update.
»
Update process takes about
5 minutes to complete.
»
Once complete, the home theater
automatically switches off and
restarts. If it does not, disconnect
the power cord for a few seconds
and then reconnect it.
