Philips HP1511/01, User Manual

Page: 3 / 5

3
Aim the beam of infrared light at the part of the body to be
treated (Fig. 6).
4
Remove the plug from the wall socket after use.
Duration of treatment
The duration of the treatment depends on the type of treatment and
the person to be treated. Treatment of a single muscle or joint should last
approximately 15 minutes. If necessary, the treatment can be repeated
several times a day. A longer treatment time than 15 minutes does not
lead to better results. You can repeat the course of several treatments a
day on several consecutive days to get a result. If there is no improvement
after 6-8 treatments, stop using the appliance and consult your doctor. For
chronic problems, the appliance can be used for longer periods of time, as
long as you follow the instructions given in the ‘Warning’ section in chapter
‘Important’.
Cleaning
Unplug the appliance and let the lamp cool down for approx. 15 minutes
before you clean the appliance.
Do not let water run into the appliance or spill water onto the appliance.
1
Clean the appliance with a cloth moistened with some distilled water
or alcohol.
storage
1
Let the appliance cool down for approx. 15 minutes before you store
it.
Replacement
Unplug the appliance and let the lamp cool down for approx. 15 minutes
before you replace the lamp.
- The lamp must be replaced with an identical infrared lamp (Philips R95E
100W).
- You can obtain or order a new lamp at your Philips dealer.
- The lamp of this appliance does not contain substances that are harmful
to the environment. You can throw away old lamps with the normal
household waste.
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment (Fig. 7).
Guarantee and service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you find its phone number in the worldwide
guarantee leaflet). If there is no Consumer Care Centre in your country, go
to your local Philips dealer.
Guarantee restrictions
The terms of the international guarantee do not cover the infrared lamp.
Troubleshooting
This chapter summarises the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the
information below, contact the Consumer Care Centre in your country.
Problem Possible cause Solution
The
appliance
doesn’t
work.
The plug is not
inserted into
the wall socket
properly.
Put the plug in the wall socket
properly.
There is a power
failure.
Connect another appliance to check
if the power supply works.
The lamp is
defective.
Replace the lamp (see chapter
‘Replacement’).
The mains cord is
damaged.
If the mains cord is damaged, you
must have it replaced by Philips, a
service centre authorised by Philips
or similarly qualified persons in order
to avoid a hazard.
3 4222.002.7565.1