36
Philips · HDP16x0 & HDP16x0TV
11 Settings
1
Switch the device on using the on/off key.
2
After the initial screen the main menu appears.
3
Use the navigation keys to select
Settings
.
4
Confirm with
OK
.
5
Use
/
to select from the following settings.
6
Confirm with
OK
.
7
Modify the settings using
OK
,
/
,
8
Confirm with
OK
.
The
¿
key takes you one step back in the menu.
Overview of the Menu
Functions
Wireless and Network
WiFi
– switching the wireless network (WLAN) off
and on.
Network Selection
– select the wireless network
with which the device is to connect.
WiFi Hot Spot
– activate and deactivate WLAN
tethering.
LAN
– switching the LAN network (LAN) off and
on.
Advanced
– (LAN mode only) check the Network
actual IP address or change the address by inputting
new address. You can also select
Automatic
or
Use static IP
DLNA Sharing
– switching DLNA off and on.
Bluetooth
– switching the Bluetooth connection off
and on.
Image settings
3D
– set the picture modes with 2D/3D options.
Keystone
– use
/
to set the keystone.
Fit Screen
– use
/
to select the screen mode
to adjust the size of your screen.
Projection mode
Front
– normal projection; the device is located
in front of the projection surface/screen
Rear
– rear projection; the device is located
behind the projection surface; the image is
reflected horizontally.
Front Ceiling
– the device is hanging from the
ceiling in an upside-down position; the image is
rotated by 180 degrees.
Rear ceiling
– the device is located behind the
projection surface, hanging from the ceiling in an
upside-down position; the image is rotated by
180 degrees and reflected horizontally.
Wall color correction
– colour correction of the
projected image to adjust to coloured projection
surfaces
Smart Settings
– select predefined settings for
brightness / contrast / colour saturation. If you mod-
ify these settings, the setting is switched to
Manual
.
Brightness
– use
/
to adjust the brightness
and press OK to confirm.
Contrast
– use
/
to adjust the contrast and
press
OK
to confirm.
Advanced
Colour temperature
– set to Warm to enhance
hotter colors such as red, or set to Cool to
make picture bluish.
Dynamic contrast
– adjusts the contrast to
keep it at the best level according to the bright-
ness of the screen.
Color space
– to convert the color space set-
ting to another standard.
Gamma
– adjusts the gamma correction
according to the type of the projected image.
Manual colors RGB
– manually adjust the hue, sat-
uration and brightness of colors in RGB mode. Use
//À/Á
to adjust the colors according to
your needs.
Manual colors CMY
– manually adjust the hue, sat-
uration and brightness of colors in CMY mode. Use
//À/Á
to adjust the colors according to
your needs.
Reset
– valid manual modifications of colors RGB
and CMY.
Sound Settings:
Volume
– adjust the volume
Deep Bass
– switching the deep bass on and off
Wide sound
– switching the wide sound on and off
Equalizer
– select the equalizer mode
Smart volume
– turn on/off the volume level auto-
matic control function
Key beep
– turn key tones on and off
Speaker
– switching the speaker on and off
System settings
Date and time
– set date and time
Android Settings
– set Android system
Screeneo_User-Manual_HDP16x0_V1-1_EN-US_253634032-A.book Page 36 Jeudi, 12. février 2015 11:31 11
