24
Philips · HDP16x0 & HDP16x0TV
Using WPS with Push Button
Configuration (PBC)
1
Switch the device on using the on/off key.
2
After the initial screen the main menu appears.
3
Use the navigation keys to select
Settings
.
4
Confirm with
.
5
Using
/
select
Wireless and Networks
.
6
Confirm with
.
7
Using
/
select
WIFI Selection
.
8
Confirm with
.
9
Use
/
to select the desired wireless net-
work..
10
Confirm with
.
11
Activate Push Button Configuration on the WLAN
access point. The WLAN access point and device
connect automatically and create a WPA protected
connection.
Wifi Hotspot
Use the portable Wi-Fi hotspot to share the device’s
network connection with computers or other devices
through the Wi-Fi network.
Activating WiFi hotspot
1
Switch the device on using the on/off key.
2
After the initial screen, the main menu appears.
3
Use the navigation keys to select
Settings
.
4
Confirm with
.
5
Using
/
select
Wireless and Networks
.
6
Confirm with
.
7
Using
/
select
WiFi Hotspot
.
8
Confirm with
.
9
Using
/
select
Portable WiFi Hotspot
.
10
Confirm with
.
11
Using
/
select
On
.
12
Confirm with
.
The projector is now visible by other Wifi devices.
Notice
Important!
The projector can work as an access point, if
only a wired lan network is installed in the
location of use.
Notice
Connection!
When the WiFi hotspot mode is activated, it
takes priority over the other connections.
Screeneo_User-Manual_HDP16x0_V1-1_EN-US_253634032-A.book Page 24 Jeudi, 12. février 2015 11:31 11
