Philips HD8821/05, Manual

Page: 12 / 60

2
1
X
X
Aroma plus
Hot water
Steam
Espresso
Memo Memo Memo
Calc
clean
Espresso lungo Coffee
2
1
X
X
6
Press the HOT WATER/STEAM button once. The machine starts
dispensing water.
-
The HOT WATER/STEAM button flashes slowly.
7
Let the machine brew hot water until the no water light lights up
continuously.
Note: If you want to stop the manual rinsing cycle, press the HOT
WATER/STEAM button, to restart the cycle press the HOT
WATER/STEAM button again.
8 Fill the water tank with fresh water up to the MAX level.
Note: The automatic rinsing cycle starts when the machine has been in
stand-by mode, or switched off for more than 30 minutes. When you have
not used the machine for 2 or more weeks, you will need to perform a
manual rinse cycle.
The machine is ready for use.
Measuring the water hardness
To be able to adjust the machine settings to the water in your region, please
measure the water hardness with the water hardness strip supplied.
1
Immerse the water hardness test strip (supplied with the machine) in
fresh water for 1 second.
2
Remove the water hardness strip and and wait for 1 minute.
1 2
3 4
3
Check how many squares have changed into the red color and check the
water hardness in below table.
numbers of red squares value to be set water hardness
1/2 A very soft water/ soft water
3 B hard water
4 C very hard water
Installing the water filter
We advise you to install the water filter as this prevents scale
build-up in your machine. You can buy the water filter separately.
12
English