ZoneScape 1-A module documentation
.
Proposal
Page
6 of 28
Schedule Defaults
By default the ZoneScape unit / module comes with disabled Schedules. Once the
user connect to the unit the following Schedules can be set for every single Zone /
Relay for the target ZoneScape unit:
Specific Date Schedule
Daily repeats Schedule
Weekly repeats Schedule
Schedule Types
ZoneScape allows for configuring three types of schedules per zone. The following
schedules can be configured per zone (can be configured and will run
simultaneously) :
1x Specific Day Schedule (Date / Start time and End time)
1x Daily repeat Schedule (Repeat every day / Start time and End time)
1x Weekly repeats Schedule (Specify repeats on
MON,TUE,WED,THU,FRI,SAT,SUN / Start time and End time)
The table below show how many schedules can be configured in one ZoneScape unit:
Schedule Type
Zone 1
Zone 2
Zone 3
Zone 4
Specific Day Schedule
√
√
√
√
Daily repeat Schedule
√
√
√
√
Weekly repeat Schedule
√
√
√
√
All the above can run simultaneously and in total every ZoneScape unit can have 12
schedules running simultaneously ( 4 Zones * 3 Schedules)
If the user tries to set a second schedule on top of a schedule type that has already
been set. The relevant schedule type will be *overwritten by the newly set schedule.
* Currently there is no notification implemented (Android and iOS Apps) that will
warn the user that a schedule exists and the user is about to overwrite an existing
schedule.