ZoneScape 1-A module documentation
.
Proposal
Page
11 of 28
Configuring Weekly Repeats schedule
Configuring a weekday repeats schedule is when the
user want to trigger / turn on and off one or more of
the lights / zones on a weekday basis . First the user
needs to select a target light / lights for this schedule.
Once the light is selected the "Every week" submenu
tab needs to be selected . Then the user needs to
select a start date / time for this schedule and end date
time for this schedule. Then the user selects on which
weekdays he needs the schedule triggered. Then in
order to send and apply the schedule to the ZoneScape
board the user needs to tap on the "OK" button. The
application will try to establish a connection with the
target ZoneScape board and once established the
configured schedule will be sent and applied to the
target ZoneScape board. Once the user taps on the
"OK button" a new progress dialog pops up informing
the user that the settings are being sent to the target ZoneScape board. On a
successful transmission the dialog should close after a 1 - 2 seconds.
After a successful transmission the newly created schedule will appear in the list of
schedules tab as follows:
The List of schedules include all the configured schedules for the target ZoneScape
unit.