Philips GC7521 Service Manual Download Page 1

Published by Philips Consumer Lifestyle 

Printed in the Netherlands 

© Copyright reserved 

Subject to modification

Service Manual

Philips Consumer Lifestyle

Steam Generator

GC7521

12/05

PRODUCT INFORMATION

Features
Fast & powerful crease removal

• Soleplate: SteamGlide
•  Continuous steam output
•  Continuous steam output:  120 g/min
• Vertical steam
•  Steam pressure:  Up to 5 Bar
•  Variable steam settings
• Steam tip
• Power: 2400 W

Easy to use

•  Water tank capacity:  1000 ml
•  Filling and emptying water:  Extra large filling hole
•  Refill any time
•  Heat-up time:  2 min
•  Hose storage:  Hose clip
•  Power cord length:  1.8 m
•  Cord freedom  (swivel):  180 degree cord freedom
•  Hose length:  1.7 m

Calc management

•  Suitable for tap water
•  Calc clean solution:  Easy rinsing

Safety Information

•  This product meets the requirements regarding interference 

suppression on radio and TV.

•  After the product has been repaired, it should function 

properly and has to meet the safety requirements as 
officially laid down at this moment.

TECHNICAL INFORMATION

Voltage 

 

:  220 - 240 V

Frequency 

:  50 - 60 Hz

Power Iron 

 

800 

W

 Boiler : 

1370 

W

Product dimension 

:  42.9 x 40 x 20.6 cm

Weight of iron 

:  1.2 kg

Weight of iron + base 

:  4.5 kg

Water advice

If the tap water in your area is very hard, it is advisable to mix 
the tap water with an equal amount of demineralised water.

SteamGlide Soleplate

SteamGlide soleplate is the best Philips soleplate.  It has great 
scratch resistancy, glides excellent and is easy to clean.

Separate Water Tank

The seperate watertank allows you to re-fill the watertank 
any time, even during ironing, without waiting.

Summary of Contents for GC7521








Reviews: