20
EN
10 Other features
Set the alarm timer
This unit can be used as an alarm clock. You can
select disc, radio or USB as alarm source.
1
Make sure that you have set the clock
correctly.
2
Press and hold
SLEEP/TIMER
for more
than two seconds.
»
'TIMER SET' is displayed. Then, a
prompt to select the sound source is
displayed.
3
Press
SOURCE
to select a source from
DISC, USB and FM, then press
SLEEP/
TIMER
to confirm.
»
In 12 hour format, AM or PM is
displayed. In this case, press / to
select AM or PM. Then the hour digits
are displayed and begin to blink.
»
In 24 hour format, the hour digits are
displayed and begin to blink.
4
Press / repeatedly to set the hour,
then press
SLEEP/TIMER
to confirm.
»
The minute digits are displayed and
begin to blink.
5
Press / repeatedly to set the minute,
then press
SLEEP/TIMER
to confirm.
»
A prompt to select the volume level is
displayed.
6
Press
VOL +/-
to select the desired
volume level, then press
SLEEP/TIMER
to
confirm.
»
The alarm timer is set and activated.
To deactivate or re-activate an alarm timer
• In standby mode, press
SLEEP/TIMER
repeatedly.
»
When the alarm timer is deactivated,
''TIMER OFF is displayed.
»
When the alarm timer is re-activated,
'TIMER ON' is displayed.
Tip
•
In BT, AUDIO IN or AUX IN mode, the alarm timer
cannot be set.
•
If the disc or USB source is selected but no audio file
can be played, FM radio is activated automatically.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
• When the unit is turned on, press
SLEEP/
TIMER
repeatedly to select a set period of
time (in minutes).
To deactivate sleep timer
• Press
SLEEP/TIMER
repeatedly until [OFF]
(off) is displayed.
Restore default settings
You can also restore the default settings of the
unit.
• In any mode, press and hold both
and
PRESET -
on the front panel for more than
five seconds.
»
After a while, 'RESET OK' is displayed.
Then, the device reboots automatically.
Summary of Contents for FX70
Page 2: ......
