11
English
Connections
Step 3: Connecting TV set
IMPORTANT!
– You only need to make one video
connection from the following options,
according to the capabilities of your TV
system.
– S-Video or Component Video
connection provides higher picture
quality. These options must be available
on your TV set.
– Connect the system directly to the TV
set.
Using Video In jack (CVBS)
●
Use the composite video cable (yellow) to
connect the system’s
CVBS
jack to the video
input jack (or labeled as A/V In, Video In,
Composite or Baseband) on the TV set.
●
To listen to TV channels through this system, use
the audio cables (white/red) to connect
AUX/
TV IN (L/R)
jacks to the corresponding
AUDIO OUT jacks on the TV set.
Television
Y
AUX/
TV
IN
LINE
OUT
(CVBS)
D
D
D
P
U
U
U
(
(
IMPORTANT!
– If both S-Video and Component (Pr
Pb Y) Video connections are used to
connect to your TV set, the Video signal
will automatically switch to S-Video
when you power up the system. To set
the VIDEO OUT (put) to ‘Pr Pb Y’, see
page 31, Using the Setup Menu – Setting
the video out.
Using component Video In jack
(Pr Pb Y)
●
Use the component video cables (red/blue/
green) to connect the system’s
Pr Pb Y
jacks to
the corresponding Component video input jacks
(or labeled as Pr/Cr Pb/Cb Y or YUV) on the TV
set.
●
To listen to TV channels through this system, use
the audio cables (white/red) to connect
AUX/
TV IN (L/R)
jacks to the corresponding
AUDIO OUT jacks on the TV set.