10
English
Connections
Step 1: Placing speakers
Front
speaker
( left )
Front
speaker
( right )
Center speaker
VIEWING AREA
Place the front left and right speakers at equal
distances from the TV set and at an angle of
approximately 45 degrees from the listening
position.
Notes:
– To avoid magnetic interference, do not position
the front speakers too close to your TV set.
– Allow adequate ventilation around the DVD Mini
Hi-Fi System.
Step 2: Connecting speakers
DIN OUT
speaker
(right)
speaker
(left)
SPEAKERS 4
SUBWOOFER
OUT
Connect the speaker wires to the SPEAKERS
(FRONT) terminals, right speaker to “
R
” and left
speaker to “
L
”, coloured (marked) wire to “
+
”
and black (unmarked) wire to “
–
”. Fully insert
the stripped portion of the speaker wire into the
terminal as shown.
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
IMPORTANT!
The type plate is located on the rear of
the system.
To avoid overheating of the system, a
safety circuit has been built in.
Therefore, your system may switch to
Standby mode automatically under
extreme conditions. If this happens, let
the system cool down before reusing it.
Speakers
Front Left (L)
Front Right (R)
Black
Black
White
Red
–
–
–
–
+
