Mechanical Instructions
4.
4.3.11 AmbiLight Lamp Unit
The AmbiLight lamp units are located in the TV’s rear cover.
1.
Remove the cable clamps.
2.
Remove all mounting AmbiLight screws.
3.
Slide the AmbiLight unit to the side and take out the unit.
4.4
Display (Dis)Assembly
Important:
Be sure to work in a dust free environment during
the following activities. In addition, the use of (fabric) hand
gloves is advised.
1.
Important:
Unplug the cables [1][2] at the LCD panel.
Be
careful
, as the LVDS connector [1] is very fragile!
2.
Unplug the backlight and loudspeaker connectors [3][4].
3.
Remove all T10 screws [5] from the mounting frame.
4.
Remove all mounting LCD panel screws [6][7].
5.
Lift the metal frame (together with all PWBs) from the LCD
panel. During lift, free the backlight and speaker cables.
6.
After removal of the frame, you can lift the LCD display
from the set.
Figure 4-15 LCD panel connectors
Figure 4-16 Speaker and LCD backlight cables
Figure 4-17 LCD panel disassembly (part 1)
Figure 4-18 LCD panel disassembly (part 2)
Figure 4-19 Bare LCD panel after frame removal
4.5
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Note:
While re-assembling the TV, make sure that:
•
All cables are placed and connected in their original
position (see figure “Chassis cable dressing” in the
beginning of this chapter and/or the “Wiring Diagram” in
chapter 6).
•
LVDS connector (SSB) is secured with plastic clamp.
•
The "grounding" wire between metal speaker grid and
frame is reconnected. See item [1] in figure “LED panel &
speaker grid grounding wire“.
F_15490_018.eps
240605
1
2
Fragile !
F_15490_021.eps
240605
4
3
F_15490_019.eps
240605
6
5
F_15490_020.eps
290705
7
3th SCART panel
(only for Europe)
F_15490_022.eps
240605
www.freeservicemanuals.info
17/6/2013
World of free manuals
