11
EN
It flashes when there is a
new missed call or when
browsing unread missed
calls in call log.
It remains steady on when
browsing the read missed
calls in call log.
It remains steadily on when
browsing blocked calls in call
log.
It flashes when receiving
incoming call.
It remains steadily on when
you are in a call.
The speaker is on.
The ringer is off.
The silent mode is set and
within active period
(the phone does not ring).
Answering machine (M775
only): it flashes when there is
a new message or when the
memory is full. It is displayed
when the telephone
answering machine is turned
on.
Press and hold to access
the network voice mail
(network and country
dependent).
It flashes when there is a
new voice message.
It remains steadily on when
the voice messages are
already viewed in the call
log.
The icon is not shown when
there is no voice message.
The silent mode is set, but is
outside of active period.
/
The alarm is activated. The
icon is displayed on the
screen of the pre-registered
handset and base station.
/
It is displayed when you
adjust the volume.
ECO
The
Eco
mode is activated.
ECO+
The
ECO+
mode is activated.
HAC
It enables the phone to
couple with the hearing
aid device to amplify the
sound and reduce noise
interference.
Check the signal
strength
The number of bars
indicates the connection
status between the handset
and base station. The more
bars are shown, the better
the connection is.
•
Make sure the handset is
connected to the base station
before you make or receive calls
and carry out the phone functions
and features.
•
If you hear warning tones when
you are on the phone, the handset
is almost out of battery or the
handset is out of range. Charge
the battery or move the handset
nearer to the base station.
Note
•
When
ECO+
is on, the signal strength is not
displayed.
Switch the handset on
or off
Press and hold to switch the
handset on or off.
Summary of Contents for Faro 770 Series
Page 2: ......
