Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care
Printed in the Netherlands
© Copyright reserved
Subject to modification
Coffee maker Essence
HD7622/02
04/01
PRODUCT INFORMATION
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Voltage
: 100 V, 120 V, 220 - 240 V
- Frequency
: 50 - 60 Hz
- Power consumption
: 1400 W
- Coloursetting
: White / vapour dusk
- Contents
: 1200 cc
- SAP coding
: HD7622/02
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
- If the switch has to be replaced please follow the next
steps:
• Remove bottom base plate.
• Pull the complete pump unit (including hose pieces)
downwards until the hose pieces are loosened from the
two water tank pipes. (hose pieces and wires must stay
connected to the pump).
• Remove the complete top
cover including the water
tank. (see picture 1)
• Now it is possible to get
to the switch.
• To remove the switch from the housing, follow the steps
shown in picture 2.
• The new switch can be placed on the same way, to do so
follow the above steps backwards!
• Insert the complete top cover assy including plastic tank
gently back into the housing.
• Take the pump unit and attach the hose pieces to the water
tank pipes of the previously inserted tank.
(be sure that the hose pieces are well attached to the water
tank pipes, otherwise leakage problems can occur)
• Assemble the base plate again.
picture 1
START
POSITION
1
MID
POSITION
2
END
POSITION
3
PRESS
IN THIS
DIRECTION
PULL AND
ROTATE
CLOCKWISE
MOVE THE
SWITCH IN
THIS DIRECTION
HOUSING
PART
SMALL
DETENT
PIECE A
picture 2
