16
Use Philips EasyLink
The DVD player supports Philips EasyLink,
which uses the HDMI CEC (Consumer
Electronics Control) protocol. EasyLink-
compliant devices that are connected through
HDMI connectors can be controlled by a single
remote control.
Philips does not guarantee 100% interoperability
with all HDMI CEC devices.
1
Turn on the HDMI CEC operations on the
TV and other connected devices. See TVs/
devices manual for details.
2
You can now enjoy the following Philips
EasyLink controls.
One-touch play
When you press the STANDBY button, it turns
on the TV and this DVD player, then video disc
play starts.
To enable One-touch play, a video disc
•
must be placed in the disc compartment
before operation.
One-touch standby
When you press and hold the STANDBY button,
all connected HDMI CEC devices switch to
standby mode simultaneously.
Tip
The default setting for EasyLink features is on. You
•
can change the default setting, see chapter ‘Adjust
settings’ -
[ Video Setup ]
>
[ HDMI Setup ]
>
[
EasyLink Setup ]
for details.
dvp3388_94_en.indd 16
dvp3388_94_en.indd 16
2/19/2009 6:13:14 PM
2/19/2009 6:13:14 PM
Summary of Contents for DVP3388
Page 2: ...2 dvp3388_94_en indd 2 dvp3388_94_en indd 2 2 19 2009 6 13 14 PM 2 19 2009 6 13 14 PM ...
Page 45: ...45 dvp3388_94_en indd 45 dvp3388_94_en indd 45 2 19 2009 6 13 15 PM 2 19 2009 6 13 15 PM ...
Page 46: ...46 dvp3388_94_en indd 46 dvp3388_94_en indd 46 2 19 2009 6 13 15 PM 2 19 2009 6 13 15 PM ...
Page 47: ...47 dvp3388_94_en indd 47 dvp3388_94_en indd 47 2 19 2009 6 13 15 PM 2 19 2009 6 13 15 PM ...