10
EN
»
The hour digits are displayed and begin
to blink.
3
Press / to set the hour, and then
press
PROG/CLOCK SET
.
»
The minute digits are displayed and
begin to blink.
4
Press / to set the minute.
5
Press
PROG/CLOCK SET
to confirm.
Turn on
Press .
»
The unit switches to the last selected
source.
Switch to standby
Press again to switch the unit to standby
mode.
»
The backlight on the display panel is
reduced.
»
The clock (if set) appears on the
display panel.
To switch to Eco power standby mode:
Press and hold for more than two seconds.
»
The backlight on the display panel
turns off.
To switch between normal standby mode and
Eco power standby mode:
Press and hold for more than two seconds.
Note
•
If no button is pressed over 15 minutes in standby
mode, this device goes to Eco power standby mode
automatically.
4 Play
Play from disc
1
Press
CD/ID3
on the remote control or
tap
SRC
repeatedly on the main unit to
select CD source.
2
Insert a disc into the disc compartment
with the printed side facing right.
»
The file starts playing automatically. If
not, press
.
•
Press
EJECT
to take the disc out of
the disc tray.
Play iPod/iPhone/iPad
You can enjoy audio from iPod/iPhone/iPad
through this docking system.
