32
Advanced settings
Enter the prefix number (maximum
5 digits) and press
m
OK
to
confirm.
• A validation tone is emitted and the
screen returns to previous menu.
Note
If no detect string (blank) is entered, the
prefix number will be automatically added
to the predial number after
r
key is
pressed.
For numbers starting with *, # or P, the
prefix number will not be added to the
predial number after
r
key is pressed.
7.7
SOS Number
This feature allows you to make an
emergency call beginning with certain
numbers, even when the number is
barred (see “Call Barring” on page 30).
You can set up to 3 SOS numbers, with
each number containing up to 4 digits.
Press
m
key in idle mode, scroll
:
to
ADVANCE SET
and press
m
OK
, scroll
:
to
SOS NUMBER
and press
m
OK
.
Enter the Master PIN when
prompted and press
m
OK
to
confirm.
Note
By default, the Master PIN is 0000.
Scroll
:
to
NUMBER 1
,
NUMBER 2
or
NUMBER 3
and press
m
OK
.
Enter the SOS number (maximum 4
digits) and press
m
OK
to confirm.
• A validation tone is emitted and the
screen returns to previous menu.
7.8
Registration
The procedures described below are the
procedures that you will find in your
handset. The procedures may vary
according to the handset you want to
register. In this case, please refer to the
manufacturer of the additional handset.
Additional handsets must be registered to
the base unit before you can use them. Up
to 6 handsets can be registered to one
base station.
The Master PIN is required before you
can register or unregister handsets.
Note
By default, the Master PIN is 0000.
On the base station, press and hold
p
for approximately 5 seconds.
On the handset, press
m
key,
scroll
:
to
ADVANCE SET
and
press
m
OK
, scroll
:
to
REGISTRATION
and press
m
OK
.
Note
If no action is taken on the handset within
10 seconds, the registration procedure will
be aborted. If this happens, repeat Step 1.
Enter the Master PIN when
prompted and press
m
OK
to
confirm.
Note
By default, the Master PIN is 0000.
WAITING _ _
is displayed on the
screen.
• Upon successful registration, a
validation tone is emitted and the
handset numbers (1 to 6) will be
assigned by the base automatically.
5
1
2
3
4
1
2
3
4
DCTG240_IFU_EN_for_India.book Page 32 Wednesday, August 1, 2007 12:15 PM