43
EN
Note
•
If the PIN is incorrect or no base is found
within a certain period, your handset
displays a notification message.
•
If registration fails, unplug the power adapter
from the base station and plug it back.
Wait for 15 seconds, and then repeat the
registration procedure.
•
The preset PIN is 0000. No change can be
made on it.
•
The handset and the base station are GAP
compliant, which means they guarantee the
minimum functions: register a handset, take
the line, make a call and receive a call. The
advanced features may not be available if
you use them with other makes.
•
To register the handset to another
GAP-compliant base station, follow the
registration procedure of that base station.
Unregister handsets
If two or more handsets share the same
base station, you can unregister the
handset or other handsets.
1
Select
[Menu]
>
[Services]
>
[Unregister]
, then press
[OK]
to
confirm.
2
Enter the system PIN. (The preset
PIN is 0000). Press
[Clear]
to
remove the number.
3
Select
[Other handsets]
, then select
a handset to be unregistered. For
pre-registered handset, select
[This
handset].
4
Press
[OK]
to confirm.
»
The handset is unregistered.
Tip
•
The handset name is displayed beside the
handset number in standby mode.
Note
•
A handset cannot unregister itself if it is the
only handset registered to the base station.
Restore default settings
You can reset your phone settings to
the original factory settings.
1
Select
[Menu]
>
[Services]
>
[Reset]
,
then press
[OK]
to confirm.
»
A confirmation request is
displayed on the handset.
2
Press
[OK]
to confirm.
»
All settings (except the
phonebook and direct access
keys information) are reset.
Summary of Contents for D460
Page 2: ......