11
EN
Charge the handset
Place the handset on the base station
to charge the handset. When the
handset is placed correctly on the
base station, you hear a docking tone.
»
The handset starts charging.
Note
•
Charge the batteries for 8 hours before first
use.
•
If the handset becomes warm when the
batteries are being charged, it is normal.
•
Over time, capacity of batteries decreases.
This is a normal battery behavior.
Your phone is now ready to use.
Check the battery level
The battery icon displays the current
battery level.
When the handset is off
the base station, the bars
indicate the battery level
(full, medium and low).
When the handset is on the
base station/charger, the
bars flash until charging is
complete.
The empty battery icon
flashes. The battery is low
and needs recharging.
If you are on the phone, you hear
warning tones when the batteries
are almost empty. The call gets
disconnected after the warning.
What is standby mode?
Your phone is in standby mode when
it is idle. The handset name, date
and time, and handset number are
displayed on the handset screen.
When the handset is on the base
station, the clock screensaver will
be displayed after a while if there is
no event like missed calls or voice
message.
Summary of Contents for D460
Page 2: ......
