6
3 Installation
Note
Follow all mounting and wiring instructions.
•
Mount the amplifier in car
You can mount the amplifier either under a seat
or on the rear tray.
Note
To avoid interference, do not place the
•
amplifier too close to the car audio or antenna.
The supplied mounting screws are 25mm long.
•
Make sure that the mounting board is thicker
than 25mm.
1
Place the unit on the location for
installation.
2
Mark the positions of the four screw
holes.
3
Drill the holes with driller of
approximately 4mm in diameter.
4
Mount the unit with the supplied screws.
i
POWER/PROTECTED
Light in green when the amplifier is
•
switched on.
Light in red when the amplifier is
•
abnormal and protected.
j
SPEAKER OUTPUT
Connect to speakers or subwoofers.
•
k
Fuse: 25A x 2
l
POWER (GND/REM/+12V)
To c12V-DC power wire,
•
ground wire, and remote control wire.
EN
CMQ405_00_UM_V2.0.indb 6
12/22/2010 11:02:43 AM
