background image

1. Important

Safety

  Read and understand all instructions before you use the apparatus.  

If damage is caused by failure to follow instructions, the warranty does 

not apply.

This unit is designed for negative ground (earth) 12 V DC operation only.

 

Use only the supplied mounting hardware for a safe and secure 

 

installation.

Do not connect any active speakers (with built-in amplifier) to the 

 

speaker terminals of the unit. Doing so may damage the active speakers.

To ensure safe driving, adjust the volume to a safe and comfortable level.

 

To avoid short circuit, do not expose the apparatus to rain or water.

 

Never expose the apparatus to direct sunlight, naked flames or heat.

 

Clean the apparatus with soft, damp cloth. Never use substances such as 

 

alcohol, chemicals or household cleaners on the apparatus.

Notice

Environmental information

All unnecessary packaging has been omitted. We have tried to make  

the packaging easy to separate into three materials: cardboard (box), 

polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) 

Your system consists of materials which can be recycled and reused if 

disassembled by a specialized company. Please observe the local regulations 

regarding the disposal of packaging materials, exhausted batteries and old 

equipment.

Any changes or modifications made to this device that are not expressly 

approved by Philips Consumer Lifestyle may void the user’s authority to 

operate the equipment.

2009 © Koninklijke Philips Electronics N.V. All rights reserved.

Specifications are subject to change without notice. Trademarks are the property of Koninklijke 

Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at 

any time without being obliged to adjust earlier supplies accordingly.

Summary of Contents for CMP400















Reviews: