27
Tip
When the unit is reset, all the settings remain
•
unchanged.
Replace fuse
If there is no power, the fuse may be damaged
and need to be replaced.
1
Take out the unit from dashboard.
2
Check the electric connection.
3
Buy a fuse that matches the voltage of the
damaged fuse (15A).
4
Replace the fuse.
If the fuse gets damaged immediately after it
has been replaced, there may be an internal
malfunction. In such case, consult your Philips
dealer.
10 Others
Listen to other devices
You can connect an external audio/video device
to the unit.
1
Connect the car audio to the device with
the supplied AV cable.
2
Tap to display the main menu.
3
Tap
[AV-IN1]
.
4
Operated the connected the device (see
the instructions manual of the device).
Tip
If you connected the system to other audio
•
device through the
REAR OUT L/R
connector
(see “Connect wires” section), tap
[AV-IN2]
to
listen to that device.
Reset
When the unit hangs up, you can reset it.
1
Press
RESET
with a ball-point pen or similar
tool.
English
EN
