▲
Night colour
Select one out of nine colour combinations for the night-time display.
•
Optimized contrast is guaranteed by the options Dark blue, Dark green and
Dark red.
This setting is active when the headlights are turned on.
▲
Status line right
Select the kind of information shown in the lower right corner of the screen.
See “Status line left” for available options.
■
System information
The System Information menu offers the following options:
❏
Diagnosis:
To analyse soft- and hardware problems (code protected).
❏
Default settings:
To reset all user specific settings (status line, screen
colours, etc.) to their factory settings.
❏
Configuration:
Information on soft- and hardware versions of the system
(for service purposes).
❏
Speed correction:
To adjust the average speed setting. Influences the
calculation of the remaining travel time and the estimated time of arrival.
a
WARNING:
The “Diagnosis” option should only be performed by an
authorized service centre for service purposes.
■
Traffic information
The Traffic Information menu offers the following options:
❏
TMC Info On/Off:
Activate/deactivate the display of all categories of TMC
traffic information at the same time.
❏
Message selection:
Select the type of TMC information by category
(selecting cathegories one by one, otherwise same function as above).
❏
Dyn.Guid. On/Off:
Activate/deactivate dynamic guidance by TMC i.e. gives
a warning when approaching the last exit before the obstruction, plans a
detour, etc.)
•
This option appears only if a RDS TMC radio is connected.
•
You can find the explanation of the TMC icons on page 47.
■
Car position
The Car Position Input menu allows you to enter a new car position manually
(for example for demonstration purposes).
40
0
5
25
75
95
100
520_e_5.chp
Thu Nov 12 09:34:03 1998
Farbprofil: Deaktiviert
Komposit Standardbildschirm
Downloaded from www.nmis.nl
