10
EN
Set clock
1
In standby mode, press and hold
CLOCK
SET
on the remote control for more than
two seconds.
»
[24H]
or
[12H]
hour format is
displayed.
2
Press / (or
+/-
) to select
[24H]
or
[12H]
hour format, and then press
CLOCK SET
.
»
The hour digits are displayed and begin
to blink.
3
Press / (or
+/-
) to set hour, and then
press
CLOCK SET
.
»
The minute digits are displayed and
begin to blink.
4
Repeat step 3 to set minute.
Note
•
If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
Tip
•
You can view clock information in Eco power mode by
pressing
CLOCK SET
.
Turn on
•
Press .
»
The unit switches to the last selected
source.
Switch to standby mode
•
Press again to switch the unit to standby
mode.
»
The clock (if set) is displayed on the
panel.
To switch to ECO standby mode:
•
Press and hold for more than two
seconds.
»
The display panel is dimmed.
Note
•
The unit switches to Eco Power Standby mode after 15
minutes in standby mode.
To switch between standby mode and ECO
standby mode:
•
Press and hold for more than two
seconds.
Find the correct viewing
channel
1
Press
SOURCE
repeatedly to switch to
the disc source.
2
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
•
Go to the lowest channel on your TV,
and then press the Channel Down
button until you see the blue screen.
•
Press the source button repeatedly on
the remote control of your TV.
Tip
•
The video-in channel is between the lowest and highest
channels and may be called FRONT, A/V IN, VIDEO etc.
See the TV user manual on how to select the correct
input on the TV.
Summary of Contents for BTD2336
Page 2: ......