12
2. Setting up the monitor
A
(main)
B
B
(main)
A
• Off:
Stop MultiView function.
A
Note
•
When you do the SWAP function,
the video and its audio source
will swap at the same time. (Refer
to page 7 “
Independent audio
playback, regardless of video input
”
for more detail.)
2.4 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
monitor base, please follow the
instructions below to avoid any possible
damage or injury.
1. Extend the monitor base to its
maximum height.
2. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen. Then
lift the monitor stand.
3. While keeping the release button
pressed, tilt the base and slide it
out.
(main)