Philips BlueControl PSD1321, Manual, Page: 16 / 238

2 Philips BlueControl flashes blue to indicate that
it is ready for treatment. The treatment starts
soon after the sensor detects the skin to be
treated.
- The LED indicator lights up solid blue and a
sequence of two tones indicates the
treatment is in progress.
3 Philips BlueControl automatically switches off
after the treatment time (approximately 15
minutes) has elapsed.
Interrupting treatment
If you want to interrupt the treatment briefly,
simply remove Philips BlueControl from the skin or
press the on/off button to switch it off.
Note: If you remove Philips BlueControl from the
skin or press the on/off button to stop treatment
before the treatment time has elapsed and you do
not resume the treatment within 2 hours, the timer
automatically resets. If you resume the treatment
within 2 hours, the countdown of the treatment
time will continue where it left off. When a
treatment is resumed, there will be no sequence of
2 tones.
Note: If the treatment feels uncomfortable at any
point, remove Philips BlueControl from the skin or
press the on/off button to switch it off.
After treatment
Treatment ends automatically after the treatment
time has elapsed, unless you remove Philips
BlueControl from the skin or press the on/off
button to stop the treatment earlier.
Note: A sequence of two different tones indicates
that Philips BlueControl switches off and the
treatment has ended.
16
English