Philips BlueControl PSD1321, Manual, Page: 21 / 238

Problem Possible cause Solution
Philips
BlueControl
suddenly
switches off with
a long beep
during treatment
and the LED
indicator lights up
solid orange.
The temperature of
Philips BlueControl
itself is too high
and the device
switched off for
safety reasons.
Let Philips BlueControl
cool down for 10 minutes.
Put Philips BlueControl
back onto your skin and
press the on/off button to
resume treatment.
Philips
BlueControl
suddenly
interrupts the
treatment and
slowly flashes
blue.
The device
measured a too
high skin
temperature and
paused the
treatment to allow
the skin to cool
down.
No action required. The
treatment restarts
automatically after the
device measures a skin
temperature in the safe
range.
Philips
BlueControl is
switched off with
a long beep and
the LED indicator
flashes orange.
Philips BlueControl
was interrupted too
many times during
treatment, for
instance because
the infrared sensor
sensed a too high
skin temperature or
because the
maximum
treatment time of
15 minutes was
exceeded.
If this happens a few times,
contact Philips.
The LED indicator
lights up solid
orange when I
press the on/off
button.
The device
temperature is too
high and Philips
BlueControl
switched off for
safety reasons.
Let Philips BlueControl
cool down for 10 minutes.
Put Philips BlueControl
back onto your skin and
press the on/off button to
resume treatment.
21
English