Installation Instruction
Type
: BGP300
Lamp
: LED
Net Weight
: 4 kg Approx
Voltage
: 240 V, 50 Hz
Max. Projected Area
: 0.16 m²
IP Classification
: IP 66
CCT : 5700 K, 4000K, 3000 K
Application
: Outdoor only
IP-66
ta
35
Outdoor Luminaire
TOWN GLOW
Caution
: Mounting to be done using M8 Grub Screw(3x).
Warranty void if Earthing is not connected.
Installation Instruction
All the pictures in the MI sheet are representative only and may vary from the Actual Product.
Outdoor Luminaire
TOWN GLOW
All the pictures in the MI sheet are representative only and may vary from the Actual Product.
IK-10
4. Use Surge protection (upto 10kV) to protect against surges/Use Type B+C surge type SPD in
distribution box to arrest switching and lighting surges.
6. Carefully re-install all seals and gaskets when servicing the luminaire.
CAUTION
1. Ensure Earthing is connected in right manner.
FAILURE OF PRODUCT DUE TO NON COMPLIANCE TO ANY OF THE ABOVE, VOIDS WARRANTY
2. Cable Entry gland should be properly tightened.
3. Product should be operated between 120-270V A.C.
5. The light source of this luminaire is not replaceable, when the light source reaches
its end of life the whole luminaire shall be replaced.
Signify Innovations India Limited
