EN
49
continued on next page
C
Network configuration (wired)
Auto setup
In order to make a wired connection, connect an ethernet cable from a router with Internet access. A network will
automatically be established.
•
In order to confirm that this unit is connected to the Internet, perform “Connection test” (refer to page 48).
•
In order to switch from wireless connection to wired, perform the following steps:
1.
Connect an ethernet cable from a router with internet access.
2.
Press
[
Q
(HOME)]
and use
[
]
to select “Setup” in the home menu, then press
[OK]
.
3.
Use
[
]
to select “Network”, then press
[OK]
.
4.
Use
[
]
to select “Network installation”, then press
[OK]
.
5.
Use
[
]
to select “Start”, then press
[OK]
.
6.
Use
[
]
to select “Wired”, then press
[OK]
.
7.
Use
[
]
to select “Auto setup”, then press
[OK]
.
•
Network setting will automatically be performed.
8.
The following screen will be displayed. Select “Finish”, then press
[OK]
to complete the settings.
Finish
Home Network
Internet
Network connection successful.
: Pass
: Pass
1
7
