Philips BDP5650/93, User Manual

Page: 16 / 30

8 EN
What you need
• Smartphones or tablets with Android 4.2/
Windows 8.1 or above, and check those
devices on whether Miracast feature is
available (the name of Miracast feature
may vary on different devices).
•
Enable Miracast on your smartphone or
tablet (refer to a related user manual for
details).
• Make sure that Miracast is enabled on
this player (press , and select [Setup] >
[Network] > [Miracast break-in] > [On] ).
1
Press to display the home menu screen
of this player.
2
On the Miracast source device, initiate the
search for this player and select this player
when it is found (refer to the source
device's user manual for details).
•
If this is the first time these 2 devices
are paired, an acknowledgement
message is displayed on your TV.
Accept it to continue the pairing.
•
To cancel the pairing, press on the
remote control.
3
Wait until the media content from the
source device is displayed on your TV,
then choose the media to start play.
»
Audio or video is streamed to your
TV through this player.
Note
•
This player can store up to 10 Miracast
devices for pair-up, and can only connect a
single Miracast certified device at a time.
•
During Miracast connection, Wi-Fi
connection on this player is temporarily
suspended.
•
To avoid interference from Bluetooth
transmission, turn off Bluetooth on your
Miracast device.
•
During Miracast streaming, video
stuttering or audio dropouts may occur,
depending on your environment (video
streaming is up to 720p).
Use Philips EasyLink
This player supports Philips EasyLink which
uses the HDMI CEC (Consumer Electronics
Control) protocol. You can use a single remote
control to control EasyLink compliant devices
that are connected through HDMI. Philips does
not guarantee 100% interoperability with all
HDMI CEC devices.
1
Connect the HDMI CEC compliant
devices through HDMI, and turn on the
HDMI CEC operations on the TV and
other connected devices (see the user
manual of the TV or other devices for
details).
2
Press .
3
Select [Setup] > [EasyLink] .
4
Select [On] under the options: [EasyLink] ,
[One Touch Play]
and
[One Touch
Standby] .
» EasyLink function is turned on.
One Touch Play
When a video disc is in the disc
compartment, press to wake up the TV
from standby, and then play a disc.
One Touch Standby
When a connected device (for example TV)
is put to standby with its own remote control,
this player is put to standby automatically.
BDP5650_93_UM_V3.0.indb 8 10/9/2014 3:25:28 PM