![background image](http://html.mh-extra.com/html/philips/bdp5005/bdp5005_user-manual_285949034.webp)
34
LIST OF SETTINGS
Category
Menus/Options
Description
Compresses the range between soft
and loud sounds.
Activates the Night Mode.
Deactivates the Night Mode.
Sets the sampling rate for outputting
the PCM audio from the digital output
(coaxial/optical).
Over 96 kHz PCM audio will be down
sampled at 48 kHz.
For BD or DVD recorded in LPCM
without copyright protection,
2-channel audio signals up to 96 kHz
are output as LPCM signals.
Select “On” to enjoy the stereophonic
virtual space through your existing 2
channel stereo system during
playback of BD-video or DVD-video.
The audio for the secondary video and
the interactive application will be
output together with the audio for the
primary video.
Only the audio for the primary video
will be output.
When playing back a BD-video which
only contains the primary audio, the
audio output will be the same case as
the “Primary Audio Only” even if the
“Blu-ray Disc Audio” is set to “Mix
Audio Output”.
HDMI Audio
• This feature is
available only when
the display device is
connected by an
HDMI cable.
• Refer to page 39 for
more information.
Sets the audio format for the sound
output from the HDMI OUT.
Digital Out
• When HDMI cable is
connected, make
sure “HDMI Audio”
setting is set to “Off”
to change the
“Digital Out”
setting.
• Refer to page 40 for
more information.
Sets the audio format for the sound
output from the DIGITAL OUT
(OPTICAL/COAXIAL).