Philips BDP3306, User Manual

Page: 44 / 68

EN - 44
䡲 Wireless
If you connect this unit to the Wi-Fi network, select
“Wireless” and set up necessary settings.
Please make a note of your Wi-Fi network name (SSID) and
its WEP / WPA key before proceeding with the setup.
Auto Scan
Search for Wi-Fi networks automatically and select the Wi-Fi
network name (SSID) from the list.
1. Follow steps 1 to 2 in “Auto Setup” on page 42.
2. Use
[
K
/
L
] to select “Wireless”, then press [OK] .
3. Use [
K
/
L
] to select “Auto Scan”, then press [OK] .
• This unit will start searching for Wi-Fi networks
automatically.
4. The result of Wi-Fi network searching will be displayed.
Use [
K
/
L
] to select the appropriate Wi-Fi network
name (SSID), then press [OK] .
• If you select an SSID without “ ”, please go to step 6.
5. “Access Point Setting (Auto Scan)” screen will appear.
Enter the WEP / WPA key of the selected Wi-Fi
network using cursor buttons, number buttons and
color key, then press
[Red] .
• If you do not know the WEP / WPA key for your
Wi-Fi network, ask your ISP or the person who set
up your Wi-Fi Network.
6. Use [
K
/
L
] to select “Continue”, then press [OK] .
7. Use [
K
/
L
] to select “Auto Setup” or “Manual Setup”,
then press [OK] .
• If you select “Auto Setup”, follow step 5 in “Auto
Setup” on page 42.
• If you select “Manual Setup”, follow steps 3 to 12 and
14 to 16 in “Manual Setup” on page 42.
D Note
• The internal wireless LAN supports following
specifications.
Please select the
access point.
Rescan
Cancel
Access 1
Access 2
Access 3
Access 4
Access 5
Access 6
Access 7
XXXXXXXXXX
a/A/@
Access Point Setting (Auto Scan)
Please input the WEP/WPA key with keypad or software keyboard.
Done Cancel Clear
- Wi-Fi standards : IEEE 802.11 b/g/n
- Frequency spectrum : 2.4 GHz
- Security protocol
: WEP / WPA / WPA2
Please confirm the
setting.
Rescan
Continue
Cancel
SSID Access 1
Security WPA-PSK(AES)
WEP/WPA Key XXXXXXXXXX