Philips BDL6531E/00, Service Manual

Page: 13 / 130

BDL6531E LCD 13
On-Screen Display
ADVANCED OPTION MENU ADVA
NCED
INPUT RESOLUTION
Note: for the VGA input only.
Set the resolution of the VGA input. This is only required when the
monitor is unable to detect the VGA input resolution correctly.
Use the
PLUS / MINUS button to toggle between
• AUTO • 1024x768 • 1280x768
• 1360x768 • 1366x768
BLACK LEVEL EXPANSION
Note: for VIDEO, S-VIDEO, COMPONENT, and HDMI (video mode)
inputs only.
Select a suitable black level expansion setting to reveal more details in
the dark parts of the image.
Use the
PLUS / MINUS button to toggle between
• OFF • LOW
• MIDDLE • HIGH
GAMMA SELECTION
Select a display gamma value to best suit the image and optimize image
brightness and contrast.
Use the
PLUS / MINUS button to toggle between
• 2.2 • 2.4 • NATIVE
SCAN MODE
Note: for VIDEO, S-VIDEO, COMPONENT, and HDMI (video mode)
inputs only.
Change the display area of the image.
Use the
PLUS / MINUS button to toggle between
• OVERSCAN - display about 95% of the original size of the image. The
rest of the areas surrounding the image will be cut off.
•
UNDERSCAN - display the image in its original size.
SCAN CONVERSION
Note: for VIDEO, S-VIDEO, COMPONENT, and HDMI (video mode)
inputs only.
Choose to enable or disable the IP (Interlace to Progressive) conversion
function. Use the
PLUS / MINUS button to toggle between
• PROGRESSIVE - enable the IP conversion function (recommended).
Once enabled, the interlace input signal will be converted to progressive
format for better display quality.
•
INTERLACE : disable the IP function. This mode is suitable for
displaying motion pictures, but it increases the chance of image retention.
FILM MODE
Note: for VIDEO, S-VIDEO, COMPONENT, and HDMI (video mode)
inputs only.
Choose to turn on or off the film mode frame conversion function.
Use the
PLUS / MINUS button to toggle between
• AUTO - enable the film mode frame conversion function for movies and
motion pictures. The monitor converts a 24 frames-per-second (24 fps)
input signal format to DVD video signal format (30 fps). Once this function
is enabled, it is recommended that you set the
SCAN CONVERSION
function to PROGRESSIVE .
• OFF - disable the film mode frame conversion function. This mode is
suitable for TV broadcasting and VCR signals.
IR CONTROL
Select the operation mode of the remote control when multiple
BDL6531E monitors are connected via the RS-232C connection.
Press the
SET/PLUS button to open the submenu, and then press the
UP / DOWN button to toggle between
• NORMAL - all monitors can be operated normally by the remote control.
• PRIMARY - designate this monitor as the primary monitor for remote
control operation. Only this monitor can be operated by the remote
control.
•
SECONDARY - designate this monitor as the secondary monitor. This
monitor can not be operated by the remote control, and will only receive
the control signal from the primary monitor via the RS-232C connection.
•
LOCK - lock the remote control function of this monitor. To unlock,
press and hold the DISPLAY button for 5 seconds.
KEYBOARD CONTROL
Choose to enable or disable the function of the keyboard (control buttons)
on the monitor. Use the
PLUS / MINUS button to toggle between
• LOCK - disable the keyboard.
• UNLOCK - enable the keyboard.
TILING
Note: For VGA input only.
With this function you can create a single large screen matrix (display
wall) that consists of up to 150 BDL6531E displays (10 displays on the
vertical side and 15 displays on the horizontal side). This requires you to
connect each BDL6531E display in a daisy-chain configuration.
Example:
• H MONITORS - select the number of monitors on the horizontal side.
• V MONITORS - select the number of monitors on the vertical side.
• POSITION - select the position of this monitor in the screen matrix.
• FRAME COMP - choose to turn on or off the frame compensation
function. If turned on, the monitor will adjust the image to compensate for
the width of the monitor bezels in order to accurately display the image.
• ENABLE : Choose to enable or disable the TILING function. If enabled,
the monitor will apply the settings in H MONITORS , V MONITORS ,
POSITION , and FRAME COMP .
Note: the PIP function will be disabled when the TILING function is
enabled, and vice versa.