BDL4988XH
28
Power LED Light
Choose {
Off
} to turn off the indicator.
Logo
Choose {
Off
} and the display will not display the
logo when
you switch on.
Advanced power management
Choose {
On
}. Then, when no signal, the display will automatically turn
off.
Source notification
When you press
[ ] POWER
button to turn on the display from
standby mode or change the input signal, the information OSD is
displayed on the upper left corner of the screen.
Choose {
Off
} to turn off this function.
DisplayPort Ver.
Set the DisplayPort version to 1.1a or 1.2, this setting is only valid on
DisplayPort input and output,
1.1a: Switch DisplayPort Ver. to 1.1a(default), the DisplayPort output is
the clone of the DisplayPort input.
1.2: Switch DisplayPort Ver. to 1.2 to support MST(Multi-Stream
Transport)
NOTE:
• If the display is black screen or abnormal under DisplayPort
source, please switch to 1.1a and turn AC off and on.
• For DP daisy chain application, please select the same DP
version in all PD.
Cooling Fan
Select {On} to turn on the cooling fan all the time. Select {Auto} to
turn on/off the cooling fan according to the display’s temperature.
NOTES:
• The default {Auto} option will start running the cooling fan if
the temperature of
45°C (113°F)
is reached and stop running
the cooling fan if the temperature of
43°C (109°F)
.
• A temperature-warning message will be shown on the screen if
the temperature reaches
58°C (136°F)
. All key functions except
[
]
key will then be disabled.
• Once the temperature reaches
60°C (140°F)
, the display
power will be shut down automatically.
Factory settings
Reset all your customized settings to the factory defaults.
5.1.6. Advanced
Picture
Sound
Tiling
Network
General settings
Advanced
Help
Jitter clean
EQ boost
USB copying
Jitter clean
Turn on/off Jitter cleaning function for HDMI and DVI signal quality
enhancement. The default setting is on.
EQ boost
Adjust digital signal EQ boost.
USB copying
Copy user logo “Welcomelogo.png” to internal memory .
5.1.7. Help
Picture
Sound
Tiling
Network
General settings
Advanced
Help
